Each step of loader electronic scale installation is introduced in detail contact email You won’t have to waste time lifting the skid, transporting it to a floor scale, lowering the load, weighing, and raising and transporting the load to the storage area We will walk you through the selection, installation, and calibration of the perfect solution for your fleet
Warm Skin Barrier Skin Cream for Cold Weather
We offer 7 days a week technical phone support to assist you with all aspects of the scale setup and long term operation
This is done at no charge to you for our support, for the life of the scale
On average it will take you 4 to 6 hours to install and calibrate the scale. Set the first scale section (end bridge) on the slab or pier so that the bulkhead end is on the end chalk line and the edge of the lower frame aligns with the chalk line offset from the centerline. Scale installation (1) make sure the installation is done on level ground (2) using a fork lift, place 2 cross beams parallel to each other on wood blocks (shown in diagram).
To adjust the scales, a security access code from the loadrite installer is required The scale options are only available if multiple scales functionality has been enabled during installation, enabling the use of different load bearing implements. Whether you’re planning a new truck scale installation or upgrading an existing scale, doing it right the first time saves time, money, and frustration Like all construction projects, preparation is the key to creating a sustainable environment for your scale and avoiding headaches down the road.
