Learn how to install one here. It just dawned on me.does it ever go bad? Therefore, a smaller nozzle must be used when spraying pure water
Rhian Sugden 04/26/2023 • CelebMafia
Methanol instantly flashes (evaporating) as soon as it enters into a hot compressor and meets the heat within it.
Which one is right for me and why
I've run both m1 and m3 and had great results All liability stemming from any actions taken in relation to this guide is solely placed upon the end user (this means you!) i have spent several weeks slowly getting pieces of my alky control methanol kit installed and due to missing a major component early on, was having trouble with following the directions. Mix 55 parts methanol, 45 parts water and that will get you close to 50/50 by weight
It really doesn't matter which way you do it, the key is to keep mixing it consistently so nothing is changing from what it was tuned on. About to add catless headers and get the car on the dyno in the coming weeks Just wanted to get a feel for those of you with a similar setup that decided to add meth injection and pulley down for more. Also, denatured alcohol is completely different than methanol from a tuning perspective
Your tune will be way off if you're tuned for meth injection and start running denatured alcohol and/or water.
Methanol, methyl hydrate, methyl alcohol, wood naphtha, wood alcohol and carbinol are all names for the same compound If you can but it in a 55 gallon drum it is less than a buck a kilogram (2.2 #)! I've been using it, but still have plenty left
