I just shot it for the first time the other day since i got it at the beginning of the year When dry firing recently, i found that my double action trigger is sometimes a bit sluggish when resetting I pulled the trigger at target
Floridagirl - u50316742 OnlyFans
When i slowly released for trigger reset, it went off on release
Got it apart at home now.
The gun ran flawlessly, as one might expect Thanks to those of you who had suggested i try this. Double check the pin holding trigger shoe on, sometimes they are a hair too long and hang up on the frame The trigger shoe pin can also 'walk' slightly and hang up on the frame, preventing the trigger from moving all the way forward.
Contact cgw for technical support or questions by using our contact page on our website. Unload the rifle, point it in a safe direction, and comply with local laws. Check your roller bearing and your trigger bar spring If your disconnector comes off to early you will short stroke the round while in da.
I would suggest cleaning out the trigger group to make sure there is nothing in the hammer/sear area that might be causing this issue
If that doesn't work call cz and send it back, pretty simple process but be prepared to wait about 6 weeks. I recently completed tuning my cz I can push the trigger forward easily with finger I'm now having issues with trigger reseting with mec gar mags
No problem with stock mags Prior to tuning the bottom end All mags and gun functioned fine I did trouble shoot reset issues
I did checked the tigger bar and trigger bar sping issues, no problem.
What i’m running into is that on occasion the trigger does not seem to reset fully and pushing it forward doesn’t help If i pull on the trigger again (after fully releasing) it will fire properly on the next trigger pull This is without doing anything else.
